The Executive Management is responsible for the overall strategies of the consortium and for managing the overall program:
Prof Mathias Uhlen, Program Director
Prof Fredrik Ponten, Vice Program Director
Dr Cecilia Lindskog Bergström, Site Director Uppsala
Dr Hanna Tegel, Site Director AlbaNova, Stockholm
Prof Peter Nilsson, Site Director SciLifeLab, Stockholm
Kalle von Feilitzen, Director of Bioinformatics
Assoc prof Emma Lundberg, Director for Subcellular Atlas
Dr Åsa Sivertsson, Head of Curation
Dr Tove Alm, Head of Communications
The Scientific Advisory Board (SAB) consists of representatives mainly from the academic field in areas such as bioinformatics, protein science, and cell biology.
The role of the SAB is to evaluate the scientific out-put and to advise in new developments and external collaborations.
Dr Cristina Al-Khalili Szigyarto is responsible for external relations.
AlbaNova site, Stockholm
SciLifeLab site, Stockholm
AlbaNova site, Stockholm
|Dr Hanna Tegel
Antigen and Antibody Factory
Group leader:Dr Hanna Tegel
Personnel: Delaram Afshari (research engineer), Roxana Astefanei (laboratory engineer),
Anna Berling (team leader), Annelie Cajander (research engineer), Malin Ebbinge (laboratory engineer),
Siri Ekblad (laboratory engineer), Henric Enstedt (laboratory engineer), Lili Gong (research engineer),
Anneli Halldin (research engineer), Klas Linderbäck (research engineer), Mona Moradi (laboratory engineer),
Emma Nygren (laboratory engineer), Anna Perols (researcher), Anne-Sophie Svensson (team leader),
Lan Lan Xu (laboratory engineer)
Responsibility: (i) Production of recombinant PrEST expression clones including cDNA synthesis, cloning, and
plasmid purification. (ii) Production and purification of PrEST-proteins used for preparation of
antigens and affinity columns. (iii) Management of immunization outsourcing. (iv) Generation of
purified antibodies through affinity purification of polyclonal antisera. (v) Western blot (WB) analysis
of antibodies approved in protein array analysis. (vi) WB antibody validation using over-expression
lysates. (vii) Storage and distribution of antigens and antibodies within the program.
Description: PrEST regions are first amplified with RT-PCR from a total RNA template pool with the specific
oligonucleotide primers designed in the Bioinformatics module. Three different RNA pools are used,
two consisting of total RNA from six individual human tissues, and one comprising total RNA from
10 different cell lines. For PrESTs not found in any RNA pool, cDNA clones are used as template
(Ultimate™ ORF LITE Clones (Human collection), Life Technologies, Carlsbad, CA and Mammalian
Gene Collection (The MGC Project team, Genome Res. 2009)). Amplicons are automatically
processed with solid phase restriction, and ligated into the plasmid vector pAff8c (Larsson, M. et al,
2000) where the human gene fragment is fused to a histidine tag and albumin binding protein
(His6ABP). After transformation into E. coli Rosetta(DE3), (His6ABP). After transformation into E. coli Rosetta(DE3), inserts are verified by DNA sequencing to
omit clones with mutations and approved clones are single cell streaked. Plasmids are collected from
all purified clones for deposition in the clone library and glycerol stocks are prepared and used as
starting material for protein production.
All proteins are expressed as His6ABP fusions in E. coli shake flask cultures upon
induction with IPTG. A fully automated protein purification system has been
developed to allow for purifications of up to 60 cell lysates at a time. One-step purification is enabled
by the hexahistidine affinity tag and metal affinity chromatography (IMAC) and performed under
denaturing conditions. After evaluation of protein concentration and purity, the molecular weight of
the PrEST proteins is determined by mass spectrometry as a final quality control. The purified proteins
are then used to prepare antigens and affinity columns with PrEST-ligands. In addition, affinity resin
with His6ABP-ligand is
The group is also responsible for the generation, purification and Western Blot analysis of all
antibodies produced in the Human Protein Atlas (HPA) program. Polyclonal antisera generated
together with collaborative partners are carefully purified in a three-step fashion consisting of:
depletion of unwanted specificity, capture of wanted specificity and a final buffer exchange step. A
manual process using gravity-flow columns carries out depletion of antibodies with unwanted
specificity. The following steps are performed on the ÄKTAxpress chromatography system enabling a
high-throughput semi-automated process where captured antibodies are eluted by a low pH glycine
buffer and automatically loaded onto a desalting column for buffer exchange. Antibodies are
supplemented with 50&37#; glycerol and 0.02&37#; sodium azide for long-term storage at -20°C. The binding
specificity of all antibodies is determined on protein microarrays to certify that only antibodies with
high specificity and low background binding are approved for immunohistochemistry analysis. All
approved antibodies are further analyzed in a high-throughput WB platform using protein lysates from
human cell lines (RT-4 and U-251 MG), human plasma depleted of IgG and HSA and whole tissue
lysates from human liver and tonsil. Published antibodies scored as non-supportive, in the standard
WB panel, are subsequently revalidated in a WB set-up comprising an over-expression lysate
(VERIFY Tagged Antigen™, OriGene Technologies, Rockville, MD) as a positive control.
ABP - Albumin Binding Protein
IPTG - Isopropyl-B-D-Thiogalactopyranoside
IMAC - Immobilized Metal Affinity Chromatography
Back to top
Epitope Mapping and Therapeutic Antibodies
Group leader: Dr Johan Rockberg
Personnel: Francis Jingxin Hu (PhD-student), Magnus Lundqvist (PhD-student), Anna-Luisa Volk
(PhD-student), Niklas Thalen (Research engineer)
Responsibility: (i) To determine antibody epitopes for HPA antibodies, and(ii) to generate
monoclonal reagents towards selected targets and screen them in functional assays for therapeutic effect.
Description: Epitope mapping is performed on a selection of the HPA's monospecific
and monoclonal reagents using a combination of platforms including: (i) cellsurface display
of target directed peptide libraries using staphylococcal display, (ii) suspension bead arrays
for mapping using overlapped or alanine mutated synthetic peptides, and (iii) large scale synthetic peptide arrays.
Monoclonal antibodies to clinically relevant target proteins are selected using a combination
of phage display and cell surface display of antibody fragments. These are subsequently screened
for desired effect in cell-based assays and cloned for production in mammalian cells as full-length
Back to top
Group leader: Prof Sophia Hober
Personnel: Sara Kanje (PhD-student), Sarah Lindbo (PhD-student),
Emma von Witting (PhD-student), Mikael Åstrand (PhD-student)
Responsibility: Protein science research.
Description: The module coordinates and conducts research projects aiming to extend the scientific
outcome of data generated within the Human Protein Atlas project as well as improving
current methodology. Both biological and technical research projects based on the vast
amount of data generated are performed to further explore the function, localization and
interactions of human proteins.
Back to top
SciLifeLab site, Stockholm
|Prof Peter Nilsson
Protein Array Technologies
Group leader: Prof Peter Nilsson
Personnel: Eni Andersson (research engineer), Burcu Ayoglu (researcher), Cecilia Hellström
(research engineer), Anna Häggmark (researcher), David Just (PhD-student), Cecilia Mattsson
(research engineer), Maria Mikus (PhD-student), Maja Neiman (researcher), Ulrika Qundos (researcher),
Julia Remnestål (research engineer), Ronald Sjöberg (researcher), Arash Zandian (PhD-student)
Responsibility: To validate the specificity and selectivity of all purified HPA antibodies. To develop and utilize peptide, antigen and antibody based microarray methodologies for large scale analysis of body fluids in the context of biomarker discovery and autoantibody profiling.
Description: Methodology for microarray based analysis of antibody specificity has been developed, where all purified
antibodies are analyzed on protein arrays with immobilized PrESTs. Each microarray is divided into 21 replicated subarrays with
384 PrESTs, enabling the analysis of 21 antibodies simultaneously. The antibodies are detected through a fluorescently labeled
secondary antibody. A specificity plot is generated for each antibody, where the signal from the binding to its antigen is
compared to the unspecific binding to all the other PrESTs. A dual color system is used in order to verify the presence of
the spotted PrESTs. Several complementary microarray formats for systematic analysis of bodyfluids are being utilized and under
constant development. The PrEST-arrays have been implemented for systematic antigen-based plasma profiling for the screening of
new autoimmunity components. The antibody microarrays with the possibility for simultaneous analysis of large amounts of
analytes with high sensitivity and the reverse phase serum microarrays which enable serum from very large patient cohorts to
be analyzed simultaneously are both utilizing in-house produced planar microarrays. The main platform for systematic
antibody-based plasma profiling, is although the suspension bead array format with capacity for multiplexing in two dimensions,
enabling the simultaneous profiling of 384 antibodies on 384 samples, see Plasma profiling.
Back to top
Group leader: Assoc prof Emma Lundberg
Personnel: Martin Hjelmare (lab manager), Dr. Lars Björk (lab manager), Hammou Ait Blal (research engineer),
Anna Bäckström (research engineer), Frida Danielsson (PhD-student), Jenny Fall (technician), Christian Gnann (research engineer),
Diana Mahdessian (PhD-student), Rutger Schutten (research engineer), Marie Skogs (PhD-student), Dr. Charlotte Stadler (researcher),
Dr. Devin Sullivan (post-doc), Dr. Peter Thul (post-doc), Mikaela Wiking (PhD-student), Lovisa Åkesson (PhD-student)
Responsibility: (i) Determine the subcellular distribution of proteins using high-resolution confocal microscopy, (ii)
validation of antibody specificity using siRNA mediated gene silencing, (iii) validation of antibody
specificity by co-staining of cells expressing GFP-tagged proteins and (iv) annotation and knowledge-
based curation of subcellular distribution profiles.
Description: The Cell Profiling module is responsible for the subcellular localization of proteins using antibodies
generated in the Human Protein Atlas (HPA) program.
For each protein the subcellular localization is studied in three different human cell lines selected,
based on RNA expression levels, from a panel of eighteen different cell lines. In order to localize the
whole human proteome in one specific cell line, U-2 OS cells have been selected and are always used.
The cell lines are cultured in vitro and immunofluorescently stained using automated protocols before
high-resolution confocal images are acquired. All images are manually annotated and for each protein
the subcellular localization, characteristics and intensity of the staining is described. To validate the
results, the corresponding target protein may be down regulated by siRNA prior to immunostaining.
Subsequently the loss of antibody staining is quantified and antibody specificity assessed.
Alternatively, the results are validated by co-staining of cells expressing GFP-tagged proteins.
In the end, a knowledge-based curation of the subcellular distribution is performed in a gene-centric
manner, taking into account the staining of one or multiple antibodies. The subcellular distribution is
classified as main location and additional locations.
Back to top
Group leader: Assoc prof Jochen M. Schwenk
Personnel: Elin Birgersson (research engineer), Sanna Byström (PhD-student), Tea Dodig-Crnkovic (PhD-student),
Kimi Drobin (PhD-student), Dr Claudia Fredolini (researcher), Dr Mun-Gwan Hong (biostatistician),
Dr MariaJesus Iglesias (researcher)
Responsibility: Utilizing HPA antibodies in multiplexed affinity arrays to profile proteins in human serum and plasma for the discovery, identification and
verification potential biomarker candidates.
Description: Antibodies are immobilized on color-coded beads to create antibody arrays in suspension. Each bead array is composed of 384
antibodies that are selected either from defined lists of proteins (targeted design) or by antibody availability (random design).
The samples are biotinylated and heat treated for the antibody array analysis, where protein profiles are generated for up to 384 samples at a time.
We are also expanding the profiling procedure into other body fluids (e.g. CSF or BAL) and are conducting studies within cancer, diabetes, cardiovascular,
neurodegenerative as well as other diseases. The data from such multiplexed single-binder assays is accordingly processed and analyzed with biostatistical
models to identify which antibodies provide disease indications. Such antibodies then enter further evaluations with regard to technical and
biological verification using mass spectrometry and to develop dual-binder sandwich immunoassays. Subsequent studies are then designed to validate the
candidates in larger sample sets from preferably independent collection sites.
Back to top
Group leader: Dr Jan Mulder
Personnel: Dr Tony Jimenez-Beristain (technician), Agnieszka Limiszewska (technician), Maddie Ciszewska (technician), Nadya Petseva (technician),
Dr Nicholas Mitsios (researcher), Dr. Jaekyung Shin (researcher), Evelina Sjöstedt (PhD student)
Responsibility:(i) Validation of antibodies against human targets on rodent tissues,
(ii) profiling the distribution of proteins in the developing, adult, and diseased nervous system,
(iii) quantification, annotation, and presentation of whole brain protein distribution profiles.
Description:Mice are widely used in biomedical research and due to its size the mouse brain is very suitable to study regional and cellular protein distributions in the
mammalian nervous system. HPA antibodies against proteins expressed in the mouse nervous system are validated on mouse brain tissue using western blot and immunohistochemistry.
Antibodies that pass validation are used to generate detailed protein distribution profiles using 20-30 coronal sections of the mouse brain with a 400 μm section interval covering all
major brain nuclei. Whole slide immunofluorescence captured at 10x primary objective is analyzed and regional,
cellular and subcellular protein distributions are quantified. Data and images are optimized for online publication.
Back to top
Group leader: Kalle von Feilitzen
Personnel: Dr Tove Alm (researcher), Dr Linn Fagerberg (researcher), Mattias Forsberg (research engineer), Fredric Johansson (research engineer), Frida Henningson Johnson (researcher),
Per Oksvold (research engineer), Lukas Persson (research engineer), Dr Åsa Sivertsson (researcher), Martin Zwahlen (research engineer)
Responsibility: (i) To deliver custom made software solutions for all operations in the Human Protein Atlas project,
(ii) to provide the collected data to the public via the Human Protein Atlas,
(iii) to map and quantify RNA-seq data, and
(iv) to initiate the analysis of human proteins by in silico selection and design of Protein Epitope Signature Tags (PrESTs).
Description: With the LIMS (Laboratory Information Management System) as the backbone, data is collected from each module in the pipeline.
The protein expression profiles, RNA-seq data and raw data from the project is published on the Human Protein Atlas public web site through annual releases.
The Bioinformatics group performs computer-based analysis of protein sequences for selection of protein fragments (PrESTs) to be used as immunogens for generation
of target-specific polyclonal antibodies. A custom made pipeline analyzes RNA-seq data from a large number of tissue, cancer and cell line samples.
The group is also heavily involved in all research performed in the project, such as data collection, data interpretation and visualization as well as statistical analysis.
Back to top
|Dr Cecilia Lindskog Bergström
|Prof Fredrik Ponten
|Dr Per-Henrik Edqvist
Tissue Microarray Production, Immunohistochemistry, and Scanning
Group leader: Ing-Marie Olsson (research engineer)
Personnel: Maria Aronsson (research engineer), Dr Anna Asplund (researcher), Dennis Kesti (biomedical analyst), Lillemor Källström
(biomedical analyst), Erik Lindahl (biomedical analyst)
Responsibility, TMA production: (i) Production of tissue microarrays (TMAs) and cell microarrays
(CMAs), (ii) handling of tissues (biobank material), cells and cell lines for TMA and CMA production
and protein extraction, (iii) sectioning of tissue and TMA blocks, (iv) quality control of TMA-blocks, (v) maintenance and cultivation of cell lines and (vi) protein extraction for Western blot analysis.
Description, TMA production:Tissue microarrays are used in the basic protein profiling for the
Human Protein Atlas. Each protein expression profile is based on 8 TMAs and 1 CMA.
The TMAs include normal tissues from 144 different individuals (triplicate samples of 44 different tissue
types) and cancer tissues from 216 different patients (duplicate samples of tumor tissues representing the
20 most common forms of human cancer). The CMA includes duplicate samples of 46 cell lines and 12 clinical
cell samples. In total, 576 tissue cores are immunostained and analyzed for each antibody.
Formalin fixed, paraffin embedded tissue specimens are collected from the Department of Pathology,
Uppsala University Hospital. Representative areas to include on the TMAs are defined for each tissue specimen
by visual inspection of a corresponding hematoxylin-eosin stained section under a microscope. Tissue cores
from these selected areas are then taken and used for TMA production. Cell lines are cultured
in vitro, harvested, fixed in formalin and dispersed in agarose prior to embedding in paraffin blocks.
These cell-blocks are used for the construction of CMAs.
Responsibility, Immunohistochemistry: (i) Handling and storage of antisera, (ii) test and titration of antibodies for
immunohistochemistry, and (iii) immunostaining of TMAs and CMAs.
Description, Immunohistochemistry: Antibodies are titrated using a specially designed test-TMA, representing a limited selection
of tissues and cells. The titration is performed based on stringent criteria, according to which
different antibody dilutions are tested. The primary working dilution is based on the protein
concentration for each antibody. When an optimal antibody dilution is found automated
immunostaining is performed on sections from eight TMAs and one CMA for basic protein
profiling in the Human Protein Atlas project. Instruments and commercially available
detection kits are used to ensure standardization and reproducibility of
immunohistochemistry. In addition, protein extractions are prepared from fresh frozen tissues
and cell lines for the purpose of running Western blot on commercial antibodies.
Responsibility, Scanning: (i) Scanning of immunohistochemically stained TMA slides, (ii) export and processing of scanned digital images from TMAs, and (iii) administration of TMAx for automated image analysis.
Description, Scanning:Immunostained TMA slides are scanned to generate high-resolution digital images, using 20x (tissue) or 40x (cells) magnification. Images from scanned TMAs are separated into spot images, representing immunostained tissue (1 mm diameter) or cell sample (0.6 mm diameter), and exported as individual TIFF files. Manual, pathology-based evaluation of images and annotation of protein expression in tissue is performed using an in-house built web based annotation software. Automated image-analysis algorithms using the TMAx system are used to generate protein expression data from images of immunostained CMAs.
Back to top
Antibody approval, Protein Profiling, and Antibody Destiny
Group leader: Dr Cecilia Lindskog Bergström
Personnel: , Groom Alemayehu (research engineer), Borbala Katona (research engineer), Feria Hikmet Noraddin (research engineer), Åsa Näsström (research engineer), Evelina Sjöstedt (PhD student), Jimmy Vuu (research engineer)
Responsibility: (i) Validation of antibody target specificity (ii), maintenance of immunostaining
reproducibility and quality, (iii) coordination and evaluation of antibodies submitted by commercial vendors
and academic scientists, (iv) annotation and final approval of immunohistochemically stained normal and
cancer tissues (v) generation of knowledge-based protein expression profiles, and (vi) continuous curation
and quality assurance of protein profiles.
Description: Optimal antibody dilution and target specificity is assessed by microscopical
examination. Available information in public databases on gene, RNA and protein level, internal and
external mRNA data, as well as in-houseinternal technical validation, such as protein arrays and Western blots, are considered in the decision process.
For each approved antibody, a final immunostaining protocol is defined and subsequently applied to the
full-scale TMAs. The images are then scanned for generation of high-resolution digital images.
Manual annotation of immunohistochemistry is performed
by specially educated personnel using a web-based in-house developed software to record the
intensity and fraction of immunoreactive cells for each given cell population, and to
determine the subcellular localization of immunoreactivity. A text comment summarizing the
characteristics for each antibody is added to the annotation. The results are visualized in a
summary view as color codes corresponding to the protein expression level in each given cell
type. In total 83 normal cell types from 144 individuals and 20 different cancer cell types
from 216 different tumors are annotated for each antibody. An independent second observer
curates all finished annotations to ensure uniform annotations of high quality. After
annotation and curation, protein profiles are evaluated and the generated data is compared
with gene, RNA and protein characterization data. Antibodies that are approved at this stage
are assigned a reliability score and a knowledge-based protein expression profile and released
for publication in the next version of the Human Protein Atlas.
Back to top
Group leader: Prof Fredrik Ponten
Personnel: Dr Julia Bergman (MD, PhD-student), Dijana Djureinovic (PhD-student)
Responsibility: (i) Develop strategies to identify potential biomarkers based on the HPA
database and other efforts, (ii) validate proteins that can be used as clinical biomarkers for disease,
(iii) participate in clinical studies, collect tumor material and clinical data to generate specific cancer
TMAs coupled to clinical databases, (iv) perform statistical analysis and validate the clinical usefulness
of identified biomarkers.
Description: The HPA database is actively mined for potential biomarkers with the aim to identify protein expression patterns that could be of medical or biological significance. Projects include various forms of human disease with an emphasis on cancer. Most projects are focused on identification and validation of biomarker candidates that can fulfill currently unmet clinical needs related to diagnostics, prognostics and treatment prediction. To address such questions, patient cohorts representing different cancers are defined and tumor material as well as clinical data is collected. These specifically designed cancer TMAs are produced and used for extended analysis of protein expression patterns to test and validate candidate proteins as useful biomarkers. The biomarker discovery and validation efforts include both internal projects and external collaborative projects.
Back to top